Licensed & Insured, in Nashville and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Nashville
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (629) 206-8784 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Nashville and surrounding areas · On-site visits included · Free estimate within 24h
Nashville Metal Roofing is a team of local certified professionals based in Nashville. We respond quickly in Nashville and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (629) 206-8784⭐⭐⭐⭐⭐ 4.9/5 · 223 verified Google reviews
“We had them do a metal roof over our old shingles on a 2,400 sq ft brick ranch and it was the best decision. The crew of four knocked it out in three days and you couldn't tell they'd been there except for the beautiful new roof. Saved us a ton versus a full tear-off.”
Metal Roof Over Shingles (Retrofit)
“Called them out for an inspection on our brick house before we listed it. They were honest that the porch roof over the entry didn't need replacing yet, just some re-fastening, and didn't try to upsell us. Appreciated that.”
Metal Roof Inspection
“They re-roofed our hay barn out past the field and it's holding up great through all this weather. Solid corrugated panels, clean flashing around the vents, and they hauled off every last scrap. Grateful to have it done before fall.”
Commercial & Agricultural Metal Roofing
“Standing seam on our brick house looks incredible, the dark bronze finish totally changed the curb appeal. One small thing: they had to come back a second time to finish the trim on the back gable, but they were upfront about it and didn't charge extra. Overall really happy.”
Standing Seam Metal Roofing
“Had a leak around where the old antenna mount was on our metal roof. They got out within a couple days, sealed it up properly with new flashing, and showed me photos of the fix. No more drips in the hallway ceiling.”
Metal Roof Repair
“Full replacement on our brick house in the suburbs and I was honestly surprised how fast it went, five days start to finish, and the yard was spotless when they left. The new roof makes the whole house look newer.”
Metal Roof Replacement
“We went with stone-coated steel on our timber-frame home and it's exactly the look we wanted. The crew was meticulous with the panel alignment and the snow guards on the steeper pitches. Worth every penny.”
Stone-Coated Steel Roofing
“New metal roof on our brick house and it's night and day from the old asphalt. They walked me through the panel options, kept the site tidy, and finished right on the timeline they quoted. Only wish the gutter work had been included in the original estimate, but the roof itself is flawless.”
Metal Roof InstallationReal photos of our work in Nashville · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener R-panel installation | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, panels and trim; pitch and deck repairs move the price. |
| Standing seam installation | Starting at $14/sq ft | Concealed fasteners, custom flashing and 40 to 60 year panels; roof complexity drives the final number. |
| Metal shingle or stone-coated steel installation | Starting at $12/sq ft | Includes underlayment, profile panels and ridge trim; dormers and valleys add labor. |
| Metal roof over shingles (retrofit) | On estimate | Needs an on-site look to confirm existing layers and deck condition meet code. |
| Travel | Included | in Nashville and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (629) 206-8784, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard 24-gauge standing seam | Starting at $10/sq ft | Includes roll-formed panels, concealed clips, underlayment and standard flashing on a typical Nashville roof. |
| Complex roof with hips and valleys | Starting at $14/sq ft | Higher due to extra cutting, custom flashings and slower panel layout on cut-up rooflines. |
| Copper or specialty metal | On estimate | Material cost and soldered seam work vary widely, so we price after an on-site look. |
| Travel | Included | In Nashville and surrounding Middle Tennessee areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 206-8784, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam replacement (tear-off included) | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment, concealed-fastener panels and trim; pitch and panel length move the price. |
| Exposed-fastener R-panel replacement | Starting at $7.50/sq ft | Includes tear-off, new underlayment and washered fasteners; barns and workshops with simple gables price lower. |
| Stone-coated steel or metal shingle replacement | Starting at $10/sq ft | Includes tear-off, deck repair allowance and profile-matched trim; complex hips and valleys add labor. |
| Copper and specialty metal replacement | On estimate | Historic and estate roofs need an on-site look for material gauge, soldered seams and porch tie-ins. |
| Travel | Included | In Nashville and surrounding Middle Tennessee areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 206-8784, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one layer of shingles | Starting at $7/sq ft | Includes furring grid, underlayment, panels and basic flashing; pitch and roof size move the rate. |
| Retrofit with metal shingles or stone-coated steel | Starting at $9/sq ft | Includes prepared deck and underlayment; profile choice and HOA design requirements move the price. |
| Retrofit with deck repair | On estimate | Soft sheathing, rot or old leak damage needs an on-site look before we quote a firm number. |
| Tear-off and new metal | On estimate | Required when two or more layers or a failed deck rule out a recover; scope depends on deck condition. |
| Travel | Included | In Nashville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 206-8784, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (reseal, screws, small patch) | Starting at $450 | Covers inspection, resealing penetrations, and replacing a handful of failed screws; roof pitch and access move the price. |
| Single panel replacement | Starting at $650 | Includes removal and replacement of one damaged panel with matching profile and color; panel type and height affect cost. |
| Flashing rebuild (chimney, skylight, wall) | Starting at $850 | New metal flashing fabricated and installed at the transition; number of penetrations and access drive the total. |
| Storm or hail damage repair | On estimate | Scope depends on how many panels are dented or punctured and whether insurance documentation is needed. |
| Travel | Included | In Nashville and surrounding Middle Tennessee counties, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (629) 206-8784, with no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-point leak repair | Starting at $450 | Covers tracing and fixing one failed fastener, pipe boot or small flashing gap, with water test. |
| Multi-point fastener and washer replacement | Starting at $650 | Replaces a run of backed-out screws and washers on exposed-fastener panels, priced by panel length. |
| Flashing rebuild at chimney or wall | Starting at $850 | Cuts out failed sealant and rebuilds the flashing with new metal and proper laps. |
| Emergency tarping after storm | Starting at $550 | Temporary weatherproof cover on an active leak, priced by roof height and access difficulty. |
| Complex or large-scale leak diagnosis | On estimate | Multiple leaks, steep or tall roofs, or unknown source need an on-site inspection before pricing. |
| Estimate | Free | Response within 24 hours at (629) 206-8784, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted screw replacement | Starting at $750 | Covers a typical residential roof with a modest number of failed fasteners and standard access. |
| Oversized screw re-fastening | Starting at $950 | For stripped or rusted purlin holes that need larger-diameter screws and fresh UV-resistant washers. |
| Full fastener-row replacement | On estimate | Barns and workshops with washers failing across whole rows need an on-site count before pricing. |
| Standing seam clip and fastener check | On estimate | Concealed fasteners and clips require a roof walk to scope the loose sections accurately. |
| Travel | Included | In Nashville and surrounding Middle Tennessee areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (629) 206-8784, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel install | Starting at $5.50/sq ft | Includes 26 or 29 gauge panels, gasketed screws and standard trim; gauge and pitch move the price. |
| R-panel (ribbed) install | Starting at $6.25/sq ft | Trapezoidal rib panels over purlins or deck with closures and trim; span and access affect cost. |
| Porch or carport panel roof | Starting at $7.00/sq ft | Smaller jobs with more flashing and tie-in detail; proximity to the house raises labor. |
| Re-fastening and screw replacement | On estimate | We count fasteners and check panel condition on site before quoting a per-screw or flat rate. |
| Travel | Included | In Nashville and surrounding Middle Tennessee counties, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (629) 206-8784, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Architectural profile metal shingle | Starting at $9/sq ft | Installed with underlayment and standard trim; roof pitch and complexity move the price. |
| Slate or shake profile metal shingle | Starting at $12/sq ft | Premium profile and finish; cut-up rooflines with valleys and dormers add labor. |
| Retrofit over one existing shingle layer | Starting at $10/sq ft | Installed over a single layer where code allows; saves tear-off but limits deck repair. |
| Full tear-off and deck repair | On estimate | Needs an on-site look to price disposal, deck replacement and flashing rebuild. |
| Travel | Included | In Nashville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 206-8784, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard profile | Starting at $9/sq ft | Includes tear-off, underlayment, standard flashing and disposal; pitch and roof size move the rate. |
| Premium shake or slate profile | Starting at $11/sq ft | Includes upgraded textured panels and trim; complex hips and valleys raise the installed cost. |
| Retrofit over existing shingles | On estimate | Code limits existing layers and deck condition must be verified before a number is given. |
| Complex or steep-pitch roof | On estimate | Tall-and-skinny homes and three-story elevations need staging and fall protection priced on site. |
| Travel | Included | In Nashville and surrounding Middle Tennessee areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 206-8784, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch or accent roof | Starting at $20/sq ft | Includes soldered copper panels, underlayment and trim; complexity and access move the price. |
| Zinc or aluminum architectural roof | Starting at $22/sq ft | Includes concealed-fastener panels and custom flashing; roof pitch and valleys affect the rate. |
| Custom flashing and trim work | Starting at $650 | Includes shop-fabricated chimney caps, valleys and dormer trim; soldered details add labor. |
| Half-round copper gutters | Starting at $28/linear ft | Includes formed gutters, hangers and outlets; height and roof access affect the price. |
| Complex or large-scale job | On estimate | Full architectural roofs with multiple planes need an on-site look before we quote. |
| Estimate | Free | Response within 24h at (629) 206-8784, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Clean and seal system | Starting at $2.50/sq ft | Wash, moss and algae removal plus clear sealer on sound panels with no active rust. |
| Rust treatment plus color coat | Starting at $3.25/sq ft | Mechanical rust removal, converter, primer and pigmented topcoat on exposed-fastener panels. |
| Full restoration system | Starting at $4.50/sq ft | Screw replacement, seam reseal, rust treatment and multi-coat finish on older metal roofs. |
| Spot repair and blend | On estimate | Isolated rust or one damaged slope needs an on-site look before we price it. |
| Travel | Included | In Nashville and surrounding Middle Tennessee areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (629) 206-8784, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Skylight curb flashing repair | Starting at $600 | Includes removal of failed curb flashing, new back pan and reset, single skylight |
| Chimney step and counter flashing | Starting at $850 | Includes new step flashing cut into brick and a counter flashing cap, single flue or stack |
| Valley or dormer flashing rebuild | Starting at $900 | Includes new formed valley metal or dormer wall flashing with corrected laps and terminations |
| Complex or large-scale job | On estimate | Steep or tall roofs, multiple penetrations or hidden rot need an on-site look before pricing |
| Travel | Included | in Nashville and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (629) 206-8784, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single entry or patio run | Starting at $1,200 | Covers one focused eave run with seam clamps or pad guards, sealed and inspected. |
| Long eave run or multiple rows | Starting at $2,400 | More rows and hardware for steep pitches above walkways, driveways, or main entries. |
| Bar, rail, or snow fence system | On estimate | Wider span systems need an on-site look at panel type, pitch, and eave length. |
| Heat cable and ice protection | On estimate | Priced after we map the ice damming pattern and gutter layout on your roof. |
| Travel | Included | In Nashville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 206-8784, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof walk, photo documentation, and written repair-versus-replace recommendation with no obligation. |
| Minor storm repair | Starting at $350 | Single panel or trim replacement, fastener repair, or flashing re-seal on an accessible roof. |
| Multi-slope wind repair | Starting at $1,200 | Ridge cap, edge and seam repairs across several slopes, with matching panel and trim ordering. |
| Hail damage to stone-coated steel | On estimate | Profile matching and material lead time drive the number, so we price after a full roof inspection. |
| Insurance claim documentation | Included | Photo file and written scope prepared for your adjuster at no extra charge with any repair. |
| Travel | Included | In Nashville and surrounding Middle Tennessee counties, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Walk-over roof inspection | Free estimate | Visual roof walk, photo documentation and a verbal summary of condition and next steps. |
| Written inspection report | Starting at $250 | Full photo report with roof diagram, condition notes and remaining service life estimate. |
| Pre-sale or insurance documentation | Starting at $350 | Detailed report formatted for buyers, sellers or insurers, with defect photos and repair priorities. |
| Storm or hail damage inspection | Free estimate | Post-storm assessment of panels, fasteners, flashing and gutters, with documentation for claims. |
| Complex or large-scale roof | On estimate | Multi-level roofs, copper and specialty metal, or many penetrations need an on-site look first. |
| Travel | Included | In Nashville and surrounding Middle Tennessee areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes on-site fabrication, hidden hangers, downspouts and discharge extensions on accessible one-story homes. |
| Heavy-gauge steel with snow and ice brackets | Starting at $14/linear ft | Thicker steel, reinforced hangers and bracket mounting for steep metal roofs that see ice load. |
| Half-round copper or steel | Starting at $22/linear ft | Half-round profile with soldered or sealed joints, matched to copper and specialty metal roofs. |
| Leaf and debris protection retrofit | Starting at $6/linear ft | Micro-mesh or perforated guard fitted to the existing run, sized for acorns and heavy oak litter. |
| Complex or large-scale job | On estimate | Multi-story access, steep pitch, extensive old gutter removal or commercial runs need an on-site look first. |
| Estimate | Free | Response within 24 hours at (629) 206-8784, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Repair and re-fastening | Free estimate | Covers screw replacement, washer renewal and flashing sealing, priced by roof size and leak count. |
| Exposed-fastener R-panel install | Starting at $4.50 per sq ft | Includes panels, fasteners and basic flashing, with gauge and insulation moving the price. |
| Standing seam commercial install | Starting at $9 per sq ft | Concealed-fastener panels for visible buildings, with pitch and panel length affecting cost. |
| Insulated panel system | On estimate | Insulation type, building span and condensation control needs require an on-site look first. |
| Travel | Included | in Nashville and surrounding Middle Tennessee counties, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 206-8784, with a written scope and no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Nashville want a crew that understands the local housing stock, not a call center three states away. Nashville Metal Roofing is a network of licensed, bonded, and insured local contractors who install, replace, re-roof, and repair metal roofs across Middle Tennessee. We work on everything from steep-pitch Victorian cottages in East Nashville and brick ranches in Donelson to farmhouse new builds on acreage in Williamson County. The common thread is real local wear: heavy tree cover, high-elevation exposure on the hills ringing the basin, and a large stock of 15 to 30 year old screw-down roofs whose fasteners are due for service.
We serve Nashville, Franklin, Brentwood, Murfreesboro, Hendersonville, and the surrounding communities. Whether you need a full Metal Roof Installation or a targeted repair before the next storm season, we start with a straight assessment of what your roof actually needs. Call (629) 206-8784 to schedule a free estimate or a free roof inspection.
Most metal roof leaks in Nashville trace back to a small set of predictable failures. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack, letting water past the screw head. Seams can separate as panels expand and contract through hot summers and freeze-thaw winters. Pipe boots and flashing fail at chimneys, skylights, and valleys where different materials meet. Wind-lifted panels after a straight-line storm or tornado-season event open the laps, and fallen limbs from the oaks, hickories, and maples close to nearly every house can puncture a panel outright.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so the stain on your ceiling may be ten feet from the actual gap. That hidden travel rots sheathing, damages insulation, and turns a modest repair into a deck replacement. If you see a ceiling stain, a loose screw, or a lifted panel after a storm, call (629) 206-8784 and let us find the source before the next rain.
The honest call between repair and replacement depends on the system and its condition. On many older screw-down roofs, a full Screw Replacement & Re-Fastening with new sealing washers restores a watertight roof for a fraction of replacement cost, and we will tell you plainly when that is the right move. When panels are perforated, seams are failing across the field, or flashing is compromised throughout, replacement makes more sense than repeated patches. For active leaks, start with Metal Roof Leak Repair and a free inspection so you can decide with real information.
We install the full range of metal systems and match the system to the home rather than the other way around. Standing Seam Metal Roofing uses concealed clips and hidden fasteners, making it the premium choice for farmhouse and modern builds where clean lines and low maintenance matter. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, workshops, and outbuildings. Metal Shingle Roofing and Stone-Coated Steel Roofing suit ranches and homes where a shake or slate profile fits the streetscape, and Copper & Specialty Metal Roofing handles porch and bay window accents.
The honest comparison is simple: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. When your deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option that saves on tear-off and disposal. When the deck is soft or layered, a full tear-off and Metal Roof Replacement is the right call.
Metal roof pricing in Nashville is usually quoted per square foot for installations, while repairs are often flat-rate. What moves the number is the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access around landscaping or steep slopes. Typical ranges vary widely by those factors, and final pricing depends on the roof and site conditions, so we quote after seeing the actual roof rather than guessing over the phone. Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer.
For a clearer picture of how we structure estimates, see our pricing page, then request a free estimate or free roof inspection so we can give you a real number for your home.
After a hail or wind event, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. What we can do is document the damage accurately so you have solid information for your own conversations with your insurer.
On permits, this is informational only: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements must be verified locally. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Nashville building or planning department before starting your project. To schedule an inspection or ask a question, reach out through our free estimate page.
Ready to get started? Nashville Metal Roofing serves in Nashville and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Nashville · Response within 24h · No commitment · ☎ (629) 206-8784
Your Free Quote Request