Metal roofing prices in Nashville vary based on square footage, material type, roof complexity, and whether you need installation, repair, or replacement. Most homeowners find that while metal roofing has a higher upfront cost than asphalt shingles, its durability and energy efficiency often make it a smart long-term investment.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Nashville and Middle Tennessee: panel systems engineered for humid summers, hail and tornado-season wind, installed over high-temperature synthetic underlayment with proper attic ventilation, flashing and manufacturer-approved details for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Nashville homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen as humid heat and winter cold expand and contract the roof. Strong wind resistance and a clean modern or farmhouse look. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of hail-beaten shingle, moss-streaked or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Some insurers recognize impact-rated roofs after hail seasons, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles, with no tear-off, less waste and lower cost. Popular on Middle Tennessee ranch homes. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing hail-dented or limb-punctured panels, resealing seams and penetrations, and fixing failed flashing before thunderstorm rain becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and wall transitions) and fixed right, not just caulked over. Emergency tarping available after severe storms. |
| Screw Replacement & Re-Fastening | From $750 | Nashville's humid heat, cold snaps and freeze-thaw expand and contract metal roofs hundreds of times a year, so screws back out and aging washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for carports, porches, barns and workshops across Middle Tennessee. Quality panels in lasting colors, installed with proper screw patterns and closures that keep out wind-driven rain. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Nashville homeowners who want metal performance without the standing seam look. Lightweight and wind-rated for thunderstorm gusts. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: strong hail and wind performance, Class A fire rating, and shake and slate profiles that suit the brick colonials and ranches common around Nashville, at a fraction of the weight. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and hold up for generations in Tennessee's humid air. Custom fabrication for the fine details. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance coating systems that extend roof life 10-15 years, restore color and clean up moss and algae streaking without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and brick transitions, the number one leak point on Nashville roofs once the spring storms arrive. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Snow guards and rail systems for metal roofs: rarely needed in Nashville, but useful on steep roofs over entries and patios to stop an occasional snow or ice storm from sliding off at once. Honest guidance on whether yours needs them. |
| Storm & Wind Damage Repair | Free inspection | Repair of hail, wind and tornado-season storm damage to metal roofing: thorough documentation with photos, honest assessment of repair versus replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating and moss or algae wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry sudden thunderstorm downpours away from brick walls and foundations, with details that handle leaves, acorns and limb litter. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, workshops, churches, carports and light commercial buildings across Middle Tennessee, from horse and cattle farms in Williamson and Rutherford counties to Sumner County shops and light-industrial buildings, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and material type : Larger roofs require more materials and labor, and premium metals like copper or stone-coated steel cost more per square foot than corrugated panels.
- Roof complexity and accessibility : Steep slopes, multiple stories, dormers, and difficult access can increase labor time and require specialized equipment, raising the overall price.
- Extent of damage or repair needed : For repairs, the severity of damage, such as leaks, rust, or storm damage, affects the cost; minor fixes may start around $450, while extensive repairs cost more.
- Additional services and permits : Services like gutter installation, snow guards, or flashing repair add to the project cost, and local permits and inspections may also be required.
What's included
- Travel included across the Nashville area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, gather your roof dimensions, material preferences, and any specific concerns before calling (629) 206-8784. A professional estimate from Nashville Metal Roofing includes a detailed breakdown of materials, labor, and any additional services, ensuring transparency and helping you plan your budget.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary due to factors like roof size, material choice, complexity of the job, and local labor rates. For example, a simple corrugated panel roof may start at $5.50 per square foot, while copper roofing can start at $20 per square foot. Repair costs also depend on the extent of damage.
Do you offer free estimates?
Yes, Nashville Metal Roofing provides free estimates for metal roof inspections and storm damage repairs. Call (629) 206-8784 to schedule your appointment and get a no-obligation quote.
What payment methods do you accept?
We accept major credit cards, checks, and cash. Financing options may be available for larger projects; please ask for details when you call (629) 206-8784.