Serving the Nashville area  ·  (629) 206-8784  ·  Open Mon-Sun 7am-7pm
📞 (629) 206-8784 Free Quote

Metal Roofing in Murfreesboro, TN (37132) · Local Professionals

Nashville Metal Roofing · Fast response in Murfreesboro and the Nashville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+223Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Murfreesboro is where old brick ranches near MTSU meet brand-new subdivisions off Veterans Parkway, and both kinds of roofs take a beating from Rutherford County hail and tornado-season wind. If you live here, you already know the drill: a storm rolls through, limbs come down, and the next thing you see is a shingle granule trail in the gutter.

Homeowners in 37132 call Nashville Metal Roofing because we show up, get on the roof, and tell you straight what it needs. Whether you are in a 1970s ranch off Greenland Drive or a two-story brick home in one of the newer developments out toward Blackman, we handle metal roof installation, repair, and replacement with fully insured crews who know Middle Tennessee weather.

Metal Roofing in Murfreesboro (37132)

Murfreesboro sits in the rolling Nashville Basin on limestone bedrock, and that matters for roofing more than people think. The ground drains fast, but the tree canopy is thick with oaks, maples, and tulip poplars, so gutters fill with leaves and acorns, and shaded north slopes stay damp enough to grow moss and algae. Older brick ranches near the university often have low-pitched shingle roofs that are prime candidates for a metal roof over shingles retrofit, while the newer subdivision homes out toward Siegel and Blackman usually have steeper pitches where standing seam or stone-coated steel makes sense. We also see plenty of exposed-fastener R-panel on barns and workshops in the rural stretches of Rutherford County, and those screws need re-fastening every few years after the freeze-thaw cycles and summer wind.

Our team has worked roofs across Nashville and the surrounding counties, from East Nashville bungalows to Murfreesboro subdivision homes, so we know how to match a panel profile and color to the house instead of slapping on whatever is cheapest. We pull the right permits and coordinate with HOAs when a neighborhood has design rules.

Our services in Murfreesboro

How a Job Works in Murfreesboro

Step 1: you call (629) 206-8784 or send a request, and we set up a free on-site assessment. We walk the roof, check the flashing, fasteners, and seams, and look at the attic if we can. You get a written estimate with the scope spelled out, not a number scribbled on a business card.

Step 2: once you approve, we schedule the work around weather and permit timing. In Murfreesboro, a full replacement usually needs a permit from the city, and we handle that paperwork. If your neighborhood has an HOA, we help you get the color and profile approved before we order material. Tight lots in older parts of town mean we plan where the dumpster and material trailer go so we do not block your neighbor's driveway.

Step 3: cleanup and final walkthrough. We magnet-sweep the yard for screws and nails, haul off old material, and walk the finished roof with you. We leave your property clean, and we do not consider the job done until you are satisfied.

Pricing in Murfreesboro depends on the size and pitch of your roof, how many layers are already on it, access, and how soon you need it done. For a typical ranch or subdivision home, metal roof installation starts around $8 per square foot, standing seam starts around $10, and a metal roof over shingles retrofit starts around $7. If you just need a repair, metal roof repair and leak repair start around $450, screw replacement and re-fastening starts around $750, and flashing or chimney repair starts around $600. Stone-coated steel and metal shingles start around $9 per square foot, and corrugated or ribbed panel roofing starts around $5.50. We give free estimates, so call (629) 206-8784 and we will put real numbers on your specific roof.

My 1960s brick ranch near MTSU has a low-pitch shingle roof. Can you install metal over it, or does it have to come off?
A lot of those ranches are good candidates for a metal roof over shingles retrofit, but it depends on the number of existing layers and the condition of the decking. Code limits how many layers you can have, so we check that first. If the shingles are curling or the deck is soft, we recommend a full tear-off. We will tell you straight which way makes sense for your house.
A storm just knocked limbs down in my yard off Memorial Boulevard. How fast can you get out for storm damage?
We offer free inspections for storm and wind damage, and we prioritize active leaks and wind-lifted panels. Call (629) 206-8784 and we will schedule the soonest available slot, usually within a day or two depending on how many calls we are handling after a storm. We document what we find so you have photos and notes for your insurance claim.
What does a metal roof cost for a typical three-bedroom house in Murfreesboro?
For a standard three-bedroom ranch or two-story subdivision home, most metal roof installations land somewhere between $8 and $12 per square foot depending on the material. Standing seam is at the higher end, corrugated panel is at the lower end. Repairs are usually a few hundred dollars. The only way to know for sure is a free estimate, so call (629) 206-8784.
Do I need a permit from the City of Murfreesboro for a metal roof replacement?
Yes, a full replacement or re-roof typically requires a permit, and the rules and inspection requirements are set by the city. You can check current requirements on the City of Murfreesboro website or call the building department. We pull the permit for you as part of the job and make sure the work meets local code.
My HOA has rules about roof colors. Can you help with approval before I order metal?
We deal with HOA design review regularly in Murfreesboro subdivisions. Before you commit to a color or panel profile, we can provide product specs and samples you can submit to your HOA. We will not order material until you have written approval, so you are not stuck with a roof your neighborhood will not accept.
Are you fully insured for work on my Murfreesboro property?
Yes. We carry general liability insurance and workers' compensation coverage for our crews. If you would like proof of insurance before we start, just ask and we will send it over. We do not subcontract work to uninsured crews.
What maintenance does a metal roof need in Murfreesboro's climate?
The main things are keeping gutters and valleys clear of leaves and acorns, checking fasteners on exposed-panel roofs every few years, and washing off moss or algae on shaded slopes. Ice dams can form at the eaves during a cold snap, so we check attic insulation and ventilation during inspections. A quick annual look after storm season saves you from bigger repairs later.
Why choose us?

Trusted professionals in Nashville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Nashville

All your work handled by qualified professionals in Nashville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

223+ Verified Client Reviews in Nashville

⭐⭐⭐⭐⭐ 4.9/5 · 223 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Nashville · Response within 24h · No commitment · ☎ (629) 206-8784

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Nashville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm