Serving the Nashville area  ·  (629) 206-8784  ·  Open Mon-Sun 7am-7pm
📞 (629) 206-8784 Free Quote

Metal Roofing in Nolensville, TN (37135) · Local Professionals

Nashville Metal Roofing · Fast response in Nolensville and the Nashville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+223Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Nolensville is a town where new two-story brick-and-stone subdivisions sit right next to working acreage with barns and workshops, and that mix shows up on the roofline. You see standing seam on the new farmhouse builds, exposed-fastener R-panel on outbuildings, and metal shingles on the older ranches along the back roads off Nolensville Road.

Homeowners in 37135 call Nashville Metal Roofing because we understand both sides of that picture. Whether your place is in a newer subdivision off Rocky Fork Road or on a few wooded acres near the Williamson County line, we can tell you what your roof actually needs and what it will cost before any work starts.

Metal Roofing in Nolensville (37135)

Nolensville sits in the rolling Nashville Basin, and the ground here is limestone bedrock under a thin layer of clay soil. That matters for roof work more than people expect. On sloped lots, water moves fast, and if your gutters and downspouts are not sized right, it ends up against the foundation or in the crawlspace. We see a lot of two-story homes with steep grades behind them, which means staging materials and getting a ladder set safely takes planning. The tree canopy is another factor. Oaks, hickories, and maples are close to nearly every house here, so gutters fill with leaves and acorns, and shaded north slopes grow moss and algae. We also work on barns and workshops on rural lots where access is wide open but the roof pitch is low and the panels are often older exposed-fastener R-panel that needs re-fastening or replacement.

Our team has worked across Nolensville and the surrounding Nashville area long enough to know the difference between a roof that just needs a few screws replaced and one that is ready for a full replacement. We handle metal shingle roofing on the older ranch homes and commercial and agricultural metal roofing on the barns and workshops out toward the county line.

Our services in Nolensville

How a Job Works in Nolensville

Step 1: You call us at (629) 206-8784 or request a free estimate online. We schedule a time to come out and look at your roof, your attic if accessible, and your gutters. We take measurements, check for soft spots, and look at how the roof ties into flashing and valleys. You get a written estimate with a clear scope, not a number scribbled on a business card.

Step 2: Once you approve the estimate, we pull the permit through the local building department if one is required for your job. In Nolensville, that is common for a full replacement, and thresholds vary, so we confirm the rules before we order materials. If you are in a subdivision with an HOA, we can help you submit the panel profile and color for approval before we start. On tight lots, we stage materials in the driveway or on the street according to local rules and keep the crew moving so your yard is not torn up for weeks.

Step 3: When the work is done, we walk the property with you. We pick up nails with a magnet roller, haul away old materials, and make sure your gutters and downspouts are clear. You get a final walkthrough and a written confirmation that the job is complete. We leave your property clean.

Pricing in Nolensville depends on the size and pitch of your roof, how many layers are currently on it, and how easy it is to access. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot, but code limits how many layers you can leave in place, so we check that first. Repairs and leak repairs start at $450, screw replacement and re-fastening starts at $750, and flashing, chimney, or skylight repair starts at $600. Gutters for metal roofs start at $9 per linear foot. Every roof is different, so call (629) 206-8784 for a free estimate and a real number for your property.

My house is in one of the newer subdivisions off Rocky Fork Road, and the roof has a low pitch. Can you install standing seam on a low-slope roof?
Standing seam can work on low slopes, but it depends on the exact pitch and the panel profile. Some low-slope roofs need a mechanically seamed panel or a different underlayment system to shed water properly. We check the pitch and the attic ventilation before recommending anything, and we will tell you if a different metal product makes more sense for your house.
A storm just came through Nolensville and I think some panels lifted. How fast can you get out for storm damage?
We offer free inspections for storm and wind damage, and we prioritize active leaks and lifted panels because they can lead to bigger problems fast. Call (629) 206-8784 and we will schedule the soonest available visit. If it is an emergency, tell us on the phone and we will do what we can to get someone out quickly.
What does a typical metal roof replacement cost for a two-story house in 37135?
For a typical two-story home in Nolensville, a metal roof replacement often falls in the range of $9 to $14 per square foot installed, depending on the panel type, roof complexity, and whether we are removing the old roof. Standing seam runs higher, starting at $10 per square foot, and stone-coated steel or metal shingles start at $9. We give you a firm number after we see the roof.
Do I need a permit to replace my roof in Nolensville, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Nolensville, and the thresholds and inspection requirements vary. We confirm the current rules with the local building department before we start and handle the paperwork as part of the job. If your home is in a historic district or an HOA, there may be design review as well, and we can help you prepare that submission.
My neighbor and I share a property line, and I want to make sure the new roof and gutters do not cause drainage onto their yard. How do you handle that?
We look at where the water will go before we install anything. If your gutters or downspouts currently discharge near the property line, we can adjust the layout or add extensions to move water away from the line. If there is an HOA, we also check the rules on downspout placement and color before the work starts.
Are you insured for roof work at my Nolensville property?
Yes. We are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance before we start, and we recommend asking any contractor for that documentation before they set foot on your roof.
What should I do about the moss and algae streaks on my metal roof in Nolensville?
Moss and algae are common on shaded slopes here because of the tree canopy and humidity. On metal roofs, a gentle wash with a soft brush and a mild detergent is usually enough, but do not pressure wash, because it can damage the finish and force water under panels. We also check that your gutters are clear and that tree limbs are trimmed back, since that is what keeps the growth coming back.
Why choose us?

Trusted professionals in Nashville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Nashville

All your work handled by qualified professionals in Nashville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

223+ Verified Client Reviews in Nashville

⭐⭐⭐⭐⭐ 4.9/5 · 223 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Nashville · Response within 24h · No commitment · ☎ (629) 206-8784

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Nashville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm