Serving the Nashville area  ·  (629) 206-8784  ·  Open Mon-Sun 7am-7pm
📞 (629) 206-8784 Free Quote

Metal Roofing in Dickson, TN (37055) · Local Professionals

Nashville Metal Roofing · Fast response in Dickson and the Nashville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+223Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Dickson sits just west of Nashville along I-40, where the land rolls out into pastures and wooded ridges dotted with farmhouses, barns, and modest brick ranches on generous lots. The housing stock here ranges from mid-century homes near downtown Dickson to newer builds on acreage off Highway 46 and Highway 70, many with low-pitched shingle roofs that take a beating from summer storms and winter freeze-thaw. If you live near the Dickson County Fairgrounds or out toward Burns, you know how fast a pop-up thunderstorm can peel back a panel or send a limb through a roof.

That’s why homeowners and property managers in 37055 call Nashville Metal Roofing. Whether you’re off Main Street in downtown Dickson or on a quiet country road near Montgomery Bell State Park, we treat your property like it’s in our own backyard.

Metal Roofing in Dickson (37055)

Dickson’s terrain is a mix of flat-to-rolling farmland and wooded hills, and that shapes how we approach every roof. On rural acreage, you often have barns, workshops, and outbuildings with exposed-fastener metal roofs that need screw replacement and re-fastening after years of thermal movement. On in-town lots, access can be tight, especially around older homes near the downtown square where mature oaks and hickories drop limbs and acorns year-round. We also see a lot of low-slope porches and additions that need careful flashing and leak repair. The clay soils and limestone bedrock here mean water can pool after heavy rain, so we pay close attention to drainage and gutter sizing on every metal roof we install or repair.

Our team has worked throughout Dickson and the surrounding Nashville area, from the streets around Dickson County High School to the newer subdivisions off Beasley Drive. We understand the local building department’s permit process for re-roofs and replacements, and we can help you navigate HOA or historic district requirements if they apply. When storms roll through, we’re ready to inspect for wind-lifted panels, separated seams, and flashing failures, and we document everything for your insurance claim if needed.

Our services in Dickson

How a Job Works in Dickson

Step 1: Call us at (629) 206-8784 or request a free estimate online. We’ll schedule an on-site assessment at your Dickson property, inspect the roof, take measurements, and discuss options. You’ll get a clear written estimate with no pressure and no hidden fees.

Step 2: Once you approve, we pull the necessary permits with the City of Dickson or Dickson County (whichever applies) and schedule the work. On rural properties, we coordinate delivery and staging to avoid blocking driveways or farm equipment. On tighter in-town lots, we plan for material staging and dumpster placement so neighbors aren’t inconvenienced. Our crews are trained on standing seam, corrugated panels, metal shingles, and stone-coated steel, and we follow manufacturer specs to protect your warranty.

Step 3: After installation or repair, we do a full cleanup, including magnet sweeping for nails and fasteners. We walk the roof and gutters with you, show you what was done, and make sure you’re satisfied before we leave. We leave your property clean and your roof ready for whatever Middle Tennessee weather throws at it.

Pricing for metal roofing in Dickson depends on the scope, materials, and access. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you’re retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind local code limits the number of layers you can recover. Repairs like leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. For smaller jobs like coating or painting, we start at $2.50 per square foot. The final cost depends on roof size, pitch, accessibility, condition of the existing roof, and urgency. Call (629) 206-8784 for a free, no-obligation estimate tailored to your Dickson property.

My barn off Highway 46 has an old corrugated metal roof with loose screws and some rust. Can you repair it without replacing the whole roof?
Yes, we handle screw replacement and re-fastening starting at $750, and we can assess whether a coating or painting would extend the life of the panels. If the rust is isolated, we may be able to replace just the affected panels. We’ll give you an honest recommendation after inspecting the roof.
A storm just blew through Dickson and lifted some panels on my roof. How quickly can you respond?
We offer free storm and wind damage inspections and prioritize emergency repairs. Call us at (629) 206-8784 and we’ll schedule a visit as soon as possible, often within 24 to 48 hours depending on demand. We’ll secure the roof to prevent further damage and provide a detailed estimate for permanent repairs.
What’s the typical cost to replace a shingle roof with metal on a 1,500-square-foot ranch house in Dickson?
For a basic corrugated or ribbed panel roof, you’re looking at roughly $5.50 to $8 per square foot installed, so a 1,500-square-foot roof might run $8,250 to $12,000. Standing seam would be higher, starting around $10 per square foot. The exact price depends on pitch, complexity, and whether we need to remove existing shingles. We’ll give you a precise quote after a free inspection.
Do I need a permit to replace my roof in Dickson, and can you help with that?
Yes, the City of Dickson and Dickson County typically require permits for roof replacements, and the requirements vary. We handle the permit application and inspections for you as part of the job, so you don’t have to worry about the paperwork. We’ll confirm the specific rules with the local building department before starting.
My neighbor’s tree hangs over my property line and drops limbs on my metal roof. Who is responsible for trimming it?
In Tennessee, you generally have the right to trim branches that overhang your property line, but you should check local ordinances and possibly talk with your neighbor first. If a limb from their tree damages your roof, their homeowner’s insurance may be responsible. We can inspect and repair any damage, and we can recommend preventive measures like snow guards or gutter guards to reduce debris buildup.
Are you fully insured for roofing work in Dickson?
Yes, we carry general liability insurance and workers’ compensation coverage. We’re happy to provide proof of insurance before we start any work on your property.
What maintenance does a metal roof need in Dickson’s climate?
Because of our humid summers and occasional ice storms, we recommend annual inspections, especially after storm season. Check for loose fasteners, debris in gutters, and any signs of moss or algae. We offer maintenance plans and can clean gutters, replace screws, and apply protective coatings to keep your roof in top shape.
Why choose us?

Trusted professionals in Nashville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Nashville

All your work handled by qualified professionals in Nashville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

223+ Verified Client Reviews in Nashville

⭐⭐⭐⭐⭐ 4.9/5 · 223 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Nashville · Response within 24h · No commitment · ☎ (629) 206-8784

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Nashville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm