Serving the Nashville area  ·  (629) 206-8784  ·  Open Mon-Sun 7am-7pm
📞 (629) 206-8784 Free Quote

Metal Roofing in Lebanon, TN (37087) · Local Professionals

Nashville Metal Roofing · Fast response in Lebanon and the Nashville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+223Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lebanon, Tennessee, is a city where old farmsteads east of town meet new subdivisions off Highway 231 and I-40. The housing stock tells the story: 1950s brick ranches near the square, newer two-story homes in neighborhoods like Five Oaks, and barns and workshops on acreage out toward Watertown. Metal roofing fits that mix, whether it's a standing seam roof on a farmhouse or an R-panel replacement on a pole barn.

Homeowners in 37087 call Nashville Metal Roofing because we understand local conditions: summer hail, straight-line winds, and the leaf and acorn litter from the oak and hickory trees that shade so many lots. When a storm rolls through and you need someone who knows Lebanon, not just Nashville, we're the team to call.

Metal Roofing in Lebanon (37087)

Lebanon sits in the rolling Nashville Basin, with limestone bedrock close to the surface and mature trees crowding many older properties. That means roof access can be tight, especially on lots near the historic downtown square where homes sit close together and power lines run low. East of the city, farm buildings and newer subdivisions face open exposure to wind and hail, and the summer storms that build over the Cumberland River valley often hit hard. We see a lot of wind-lifted panels on barns, failed fasteners on older corrugated roofs, and flashing leaks around chimneys and skylights on 1970s ranches. Our crews are trained to work safely on steep pitches and to navigate tight driveways and landscaping without damage.

We've been serving Lebanon and the surrounding Nashville area for years, and we know the local building department's permit process and what it takes to get a roof inspection passed. Whether it's a historic home near the square or a new build in a subdivision, we bring the right materials and experience to do the job right.

Our services in Lebanon

How a Job Works in Lebanon

Step 1: You call us at (629) 206-8784 or request a free estimate online. We'll schedule an on-site assessment at your convenience, typically within a few days. Our inspector will evaluate your roof's condition, take measurements, and discuss your options, whether that's a repair, a replacement, or a retrofit over existing shingles. You'll get a written estimate before any work begins.

Step 2: Once you approve the estimate, we'll pull the necessary permits from the City of Lebanon and schedule your project. For homes in historic districts or HOAs, we'll coordinate any required design approvals. Our crew arrives on time, protects your landscaping, and works efficiently. Most residential roofs take one to three days, depending on size and complexity. We keep you informed throughout the process.

Step 3: After installation, we do a thorough cleanup, including magnet sweeps for nails and debris. We walk the property with you to ensure everything meets your satisfaction. We don't consider a job done until you're happy with the result.

Pricing for metal roofing in Lebanon depends on the material, roof size, and complexity. As a ballpark, corrugated and ribbed panel roofing starts at $5.50 per square foot, metal roof installation at $8 per square foot, and standing seam at $10 per square foot. A typical 1,500-square-foot roof might run $8,250 to $15,000 installed, depending on the profile. Repairs start at $450 for leak fixes, and screw replacement or re-fastening starts at $750. We also offer free inspections and estimates, so you can get an accurate number for your specific property. Call (629) 206-8784 to schedule yours.

My 1960s ranch in Lebanon has a low-pitch roof. Can I install metal over the existing shingles?
Yes, in many cases. A metal roof over shingles (retrofit) is often possible if your roof has no structural issues and the existing shingles are in decent shape. We'll inspect your attic and decking to confirm. This can save on tear-off costs, but local code limits the number of layers, so we'll verify with the city. Starting at $7 per square foot.
A storm just knocked limbs onto my roof in Lebanon. How quickly can you respond for emergency repairs?
We prioritize storm damage calls. Call us at (629) 206-8784 and we'll schedule an inspection as soon as possible, often within 24 to 48 hours. We'll tarp any active leaks and provide a written estimate for permanent repairs. We also document damage for insurance claims, though coverage depends on your policy.
What's the typical cost to replace a metal roof on a 2,000-square-foot home in Lebanon?
For a 2,000-square-foot home, a basic corrugated panel roof might start around $11,000, while standing seam could range from $20,000 to $25,000 installed. Factors like roof pitch, accessibility, and trim work affect the final price. We provide free estimates so you can get an exact figure for your home.
Do I need a permit to replace my roof in Lebanon, and how long does it take?
Yes, the City of Lebanon requires a permit for roof replacements. We handle the application and inspection process for you. Permit approval usually takes a few business days, depending on the workload. We'll schedule your project once the permit is issued.
My HOA requires approval for a metal roof. Can you help with that process?
Absolutely. We're familiar with many local HOAs and can provide material samples, color charts, and specifications for your submission. We'll coordinate with your HOA to ensure the chosen profile and color meet their guidelines. If you have a property line dispute, we recommend resolving it with your neighbor before work begins, as we cannot install over a disputed line.
Are you fully insured for roofing work in Lebanon?
Yes, we carry general liability insurance and workers' compensation coverage. Your property and our crew are protected.
How should I maintain my metal roof in Lebanon's climate?
Inspect your roof twice a year, especially after storms. Remove leaves and debris from valleys and gutters to prevent moisture buildup. Check fasteners for tightness and look for any signs of rust or damage. We offer maintenance plans and inspections to keep your roof in top shape.
Why choose us?

Trusted professionals in Nashville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Nashville

All your work handled by qualified professionals in Nashville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

223+ Verified Client Reviews in Nashville

⭐⭐⭐⭐⭐ 4.9/5 · 223 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Nashville · Response within 24h · No commitment · ☎ (629) 206-8784

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Nashville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm