Serving the Nashville area  ·  (629) 206-8784  ·  Open Mon-Sun 7am-7pm
📞 (629) 206-8784 Free Quote

Metal Roofing in White House, TN (37188) · Local Professionals

Nashville Metal Roofing · Fast response in White House and the Nashville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+223Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

White House is a small city with a big mix of rooftops: 1990s and 2000s brick subdivisions off Highway 31W, farmhouses and workshops on acreage out toward the county line, and older homes near the White House Heritage schools. The rolling ground north of Nashville takes a beating from spring hail and straight-line wind, and the trees that make this area feel rural also drop limbs and acorns on roofs all year.

Homeowners in 37188 call us because we know the difference between a standing seam job on a new build and a retrofit over shingles on a 1970s ranch. We are based in Nashville, we are fully insured, and we handle everything from a $450 leak repair to a full metal roof replacement. If you are near the White House Municipal Park or out on a back road toward Cross Plains, we can get an estimate out to you.

Metal Roofing in White House (37188)

White House sits in Sumner County where the land rolls and drains toward small creeks and ditches. That matters for roofing. On a lot with a low pitch and a shallow backyard, water off a metal roof can pool near a foundation if the gutters are not sized right. We see a lot of homes here with mature oaks and hickories close to the house, which means shade, moss, and leaf litter on the north slopes. Farm-edge properties often have barns and workshops with exposed-fastener R-panel, and those fasteners back out over time from wind and thermal movement. Newer subdivisions off 31W tend to have steeper pitches and HOA design rules, so panel profile and color need to be checked before we order material.

Our team has worked across Nashville and the surrounding counties for years, and White House is one of our regular service areas. We know which streets have tight driveways, which neighborhoods have HOA review, and what the local building department expects for a re-roof. We are fully insured with general liability and workers' compensation, so you are not taking on risk when our crew is on your property.

Our services in White House

How a Job Works in White House

Step 1 is a free on-site assessment. We come out, get on the roof (or use a ladder and drone where access is tight), and look at the panels, fasteners, flashing, and decking. You get a written estimate with line items, not a ballpark over the phone. If it is a storm damage call, we document what we find so you have photos and notes for your insurance company. We never promise coverage, but we do help with the paperwork.

Step 2 is the work itself. For a White House subdivision with HOA rules, we confirm the approved panel profile and color before we order. For a farm property with a long gravel drive, we stage material so we are not blocking access. Permits are commonly required for a full replacement, and thresholds vary by jurisdiction, so we pull them and schedule inspections with the local building department. If your home has a low-pitch porch or a tricky chimney flashing, we fabricate the pieces on site rather than forcing a universal part to fit.

Step 3 is cleanup and a final walkthrough. We magnet-sweep for screws and nails, haul off old material, and walk the roof and gutters with you. We do not leave a job until you have seen the finished work and know what to expect for maintenance.

Pricing in White House depends on the size and pitch of the roof, the condition of the decking, access, and how urgent the job is. For a typical subdivision home, metal roof installation starts around $8 per square foot, standing seam starts around $10, and a metal roof replacement starts around $9. If you are retrofitting over existing shingles, that starts around $7 per square foot, but code limits how many layers you can leave in place. Smaller jobs are common here too: a metal roof repair or leak repair starts around $450, screw replacement and re-fastening starts around $750, and flashing or chimney repair starts around $600. Gutters for metal roofs start around $9 per linear foot. We give free estimates, so call (629) 206-8784 and we will put real numbers on your specific roof.

My house is in one of the older neighborhoods near White House Heritage High School, and the roof has a low pitch. Can I still go with standing seam?
Low pitch is common on older ranches around here, and standing seam can work if the panels are wide enough and the seams are raised properly. We check the slope and the decking first. Sometimes a mechanically seamed panel is the right call, and sometimes a different profile makes more sense. We will tell you straight at the estimate.
A storm just took off some shingles and I have water coming in. How fast can you get to White House?
Call (629) 206-8784 and tell us where you are. We prioritize active leaks and storm damage in White House and the surrounding area. We can often get out the same day or next day to tarp or make a temporary repair, then schedule the permanent fix. We also document the damage for your insurance claim.
What does a metal roof actually cost for a 2,000 square foot house in 37188?
For a house that size, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam is closer to $10 per square foot. A full replacement with tear-off usually lands between those. The big variables are pitch, how many penetrations (chimneys, skylights, vents), and whether the decking needs repair. We give a free estimate so you are not guessing.
Do I need a permit to replace my roof in White House, and does the city inspect it?
Roofing permits are commonly required for a full replacement or re-roof in White House, and the thresholds and fees are set by the local building department. We pull the permit and schedule the inspection. Rules can change, so we always confirm with the city before work starts. If your home is in an HOA, there may be a separate design review.
My neighbor's tree hangs over my roof and drops limbs on it. Who is responsible if a branch damages my metal roof?
In Tennessee, a limb that falls from a neighbor's tree onto your roof is generally your responsibility for cleanup and repair unless the tree was known to be dead or hazardous and the neighbor was notified. We can document the damage for your insurance. If the tree is on the property line, it is worth a conversation with your neighbor before a storm does the talking.
Are you insured for work on my property in White House?
Yes. We carry general liability insurance and workers' compensation coverage. That means if a crew member is injured on your roof or something gets damaged, you are not exposed.
What should I do to maintain a metal roof in White House between storms?
Keep the gutters clear, especially if you have oaks or hickories nearby. Check the fasteners on exposed-panel roofs once a year, because wind and heat can back them out. Look at the flashing around chimneys and skylights after any big storm. A free inspection is a good idea in spring and fall. Small issues here turn into leaks fast because of the freeze-thaw we get in winter.
Why choose us?

Trusted professionals in Nashville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Nashville

All your work handled by qualified professionals in Nashville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

223+ Verified Client Reviews in Nashville

⭐⭐⭐⭐⭐ 4.9/5 · 223 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Nashville · Response within 24h · No commitment · ☎ (629) 206-8784

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Nashville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm