Serving the Nashville area  ·  (629) 206-8784  ·  Open Mon-Sun 7am-7pm
📞 (629) 206-8784 Free Quote

Metal Roofing in Smyrna, TN (37167) · Local Professionals

Nashville Metal Roofing · Fast response in Smyrna and the Nashville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+223Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Smyrna's mix of mid-century ranches and newer subdivision homes means roofs here take a beating from sun, storms, and time. If you live near the Sam Davis Home or off Murfreesboro Pike, you've probably seen shingles curling or fasteners backing out on your own street.

That's where we come in. Nashville Metal Roofing is based just up the road in Nashville, and we serve Smyrna (37167) with metal roofing installation, repair, and replacement. Whether you're in a 1960s ranch off Nissan Drive or a newer build near the lake, we know the local conditions and can help you decide if metal is right for your home.

Metal Roofing in Smyrna (37167)

Smyrna sits in Rutherford County, just southeast of Nashville, and the housing stock tells a story. You've got older ranches and split-levels from the 1950s through 1970s with low-pitch shingle roofs that are now showing their age, and you've got newer subdivisions with two-story brick and stone homes that are still under 20 years old. The terrain is mostly flat to gently rolling, but mature trees are everywhere, which means leaf litter, acorns, and the occasional limb are constant roof stressors. Summers are hot and humid, and spring storms often bring hail and straight-line winds. That combination leads to the same problems we see over and over: lifted shingles, backed-out fasteners, and leaks around flashing.

Our team has worked on roofs all over Smyrna and the surrounding areas. We know that a ranch off Old Nashville Highway might need a full tear-off and metal replacement, while a newer home near the Smyrna Airport might just need screw replacement and re-fastening on an existing metal roof. We also handle storm damage repair and free inspections, so you can get a straight answer before the next round of weather hits.

Our services in Smyrna

How a Job Works in Smyrna

Step 1: You call us at (629) 206-8784 or request a free estimate online. We'll schedule a time to come out and inspect your roof, whether you're in a tight-lot subdivision off Rocky Fork Road or on a larger property out toward Almaville. We look at the roof condition, attic ventilation, flashing details, and any signs of leaks or storm damage. Then we give you a written estimate with options, no pressure.

Step 2: Once you approve, we pull the required permits from the Town of Smyrna building department (we'll verify current requirements with them) and schedule the work. For a full replacement, we protect your landscaping and driveway, tear off the old roofing, and install the new metal roof according to manufacturer specs. If your home is in an HOA, we'll help you submit the paperwork for color and profile approval before we order materials. Tight lots are common in some of the older neighborhoods, so we plan for staging and dumpster placement ahead of time.

Step 3: After the work is done, we clean up thoroughly. We use magnets to pick up nails and screws, blow off your walks and driveway, and haul away all debris. Then we walk the job with you to make sure you're satisfied. We don't leave until you're happy.

Pricing for metal roofing in Smyrna depends on the size and complexity of your roof, the material you choose, and whether there's any underlying damage. For a typical ranch home, metal roof installation starts around $8 per square foot, while standing seam runs about $10 per square foot. If you're replacing an existing roof, expect starting prices around $9 per square foot, and a metal roof over shingles (retrofit) starts at $7 per square foot. Smaller jobs like metal roof repair or leak repair start at $450, and screw replacement and re-fastening starts at $750. We also offer free estimates, so you can get a realistic number for your specific home. Call us at (629) 206-8784 to schedule yours.

My ranch off Sam Ridley Parkway has shingles that are curling and fasteners backing out. Is it worth switching to metal?
That's a common issue on Smyrna's older ranches. If your shingles are near the end of their life, metal is a smart upgrade. It lasts longer, reflects heat, and handles the summer storms better. We can inspect your roof and give you a comparison of repair vs. replacement so you can decide.
A storm just blew through Smyrna and I think my roof is damaged. How fast can you respond?
We offer free storm damage inspections and can usually get out within a day or two after a storm. Call us at (629) 206-8784 and we'll schedule a time to assess the damage and provide a written estimate for any needed repairs.
What's the ballpark cost for a metal roof on a 2,000-square-foot home in Smyrna?
For a 2,000-square-foot home, a basic corrugated or ribbed panel roof might start around $11,000 to $14,000, while standing seam could run $18,000 to $22,000. These are rough estimates. The actual price depends on roof pitch, complexity, and material choice. We provide free estimates so you can get an accurate number.
Do I need a permit from the Town of Smyrna for a metal roof replacement?
Yes, roofing permits are typically required for a full replacement in Smyrna. Requirements can vary, so we always verify with the Town of Smyrna building department before starting work. We handle the permit application and inspections as part of our service.
My HOA requires approval for roof color. Can you help with that?
Absolutely. We work with many HOAs in Smyrna and can provide the documentation they need, such as color samples and manufacturer specs. We'll help you get approval before we order materials so there are no surprises.
Are you fully insured for roofing work in Smyrna?
Yes, we carry general liability insurance and workers' compensation coverage. We're happy to provide proof of insurance upon request so you can have peace of mind.
How often should I have my metal roof inspected in Smyrna?
We recommend an inspection every two to three years, especially after major storms. Smyrna's trees drop a lot of debris, and fasteners can loosen over time. A quick inspection can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Nashville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Nashville

All your work handled by qualified professionals in Nashville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

223+ Verified Client Reviews in Nashville

⭐⭐⭐⭐⭐ 4.9/5 · 223 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Nashville · Response within 24h · No commitment · ☎ (629) 206-8784

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Nashville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm