Serving the Nashville area  ·  (629) 206-8784  ·  Open Mon-Sun 7am-7pm
📞 (629) 206-8784 Free Quote

Metal Roofing in Nashville, TN (37203) · Local Professionals

Nashville Metal Roofing · Fast response in Nashville and the Nashville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+223Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Nashville's rooftops tell the city's story, from the deep porches of 1920s bungalows in East Nashville and Inglewood to the low-slung brick ranches out toward Donelson and Bellevue, all under a canopy of oaks and tulip poplars that drop limbs and acorns every time a storm rolls through. Sitting in the rolling Nashville Basin along the Cumberland River, our neighborhoods take a beating from hail, straight-line wind, and fast-building summer thunderstorms.

Homeowners around 37203 call Nashville Metal Roofing because we know how this city's housing stock ages and how local weather attacks it. Whether you are near Centennial Park or out in the leafy streets of Sylvan Park, we handle standing seam installs, metal roof replacement over worn shingles, and leak repair after a storm, all with fully insured crews.

Metal Roofing in Nashville (37203)

Nashville's mix of 1900s Victorian cottages, Craftsman bungalows, and Foursquares means steep pitches, deep porches, and tight lots where ladder access and staging take planning. Out in Belle Meade and Forest Hills, Tudor and Colonial Revival homes often have complex rooflines with slate or tile that need careful flashing and transitions. Across Donelson, Madison, Hermitage, and Antioch, low-pitched ranch roofs are prime candidates for a metal roof over shingles retrofit, while new infill townhomes in Germantown and the Gulch edge call for clean standing seam profiles. The limestone bedrock and rolling terrain mean drainage matters, and our crews plan gutter and downspout placement so water moves away from foundations. We also work on farmhouse builds, barns, and workshops in Williamson, Rutherford, and Sumner counties, where exposed-fastener R-panel is common. Moss and algae streak shaded slopes, and freeze-thaw cycles in winter can work at fasteners and flashing. Our team serves Nashville and the surrounding areas with installation, repair, and replacement tailored to these local conditions.

Our services in Nashville

How a Job Works in Nashville

Step 1: Call us at (629) 206-8784 or request a free on-site assessment. We walk the roof, check fasteners, seams, and flashing, and talk through your options, whether that is a repair, a replacement, or a retrofit over existing shingles.

Step 2: Once you approve the scope, we schedule the work and handle the details. In historic districts or HOA communities, we help coordinate design review for panel profile and color. Tight lots in East Nashville or Hillsboro Village may need careful staging, and we always confirm permit requirements with the local building department before starting.

Step 3: We finish with a full cleanup and a final walkthrough. Magnets sweep the yard for screws and metal scraps, gutters are cleared, and we walk the finished roof with you so you know exactly what was done and how to care for it.

Pricing in Nashville depends on roof size, pitch, access, and the condition of the existing roof. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a metal roof over shingles retrofit around $7. Corrugated and ribbed panel roofing starts at $5.50, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Repairs start at $450 for leaks, screw replacement and re-fastening at $750, flashing, chimney, and skylight repair at $600, and gutters for metal roofs at $9 per linear foot. Storm and wind damage inspections are free. Call (629) 206-8784 for a free estimate tailored to your property.

My 1950s ranch in Donelson has a low-pitch shingle roof. Can you install metal over it?
Yes, a retrofit over existing shingles is often possible if the roof structure is sound and local code allows the existing layers. We inspect the deck and underlayment first, and we confirm the layer limit with the local building department before recommending it.
A storm just knocked limbs onto my roof in East Nashville. How fast can you respond?
We prioritize active leaks and storm damage. Call (629) 206-8784 and we will schedule an inspection, often same day or next day, to tarp or repair as needed and document the damage for your insurance claim.
What does a typical metal roof replacement cost in Nashville?
Most replacements fall between $9 and $12 per square foot depending on panel type, roof complexity, and whether we remove the old roof. Access, pitch, and flashing details are the biggest cost factors. We provide a free estimate so you know the exact number.
Do I need a permit for a metal roof in Nashville?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds vary by jurisdiction. We always check with the local building department and can point you to the City of Nashville website for general information. Rules must be verified locally.
My HOA requires a specific roof color. Can you help with approval?
Yes. We work with HOA design review boards regularly and can provide panel samples and product specs for approval. If your property line is close to a neighbor, we also confirm setback and drainage requirements before installation.
Are you fully insured for work at my Nashville home?
Yes, we carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Nashville's climate?
Annual inspections help catch loose fasteners, debris buildup, and flashing wear before they become leaks. Keep gutters clear of leaves and acorns, and trim overhanging limbs. We offer inspection and maintenance plans to keep your roof performing through storm season.
Why choose us?

Trusted professionals in Nashville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Nashville

All your work handled by qualified professionals in Nashville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

223+ Verified Client Reviews in Nashville

⭐⭐⭐⭐⭐ 4.9/5 · 223 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Nashville · Response within 24h · No commitment · ☎ (629) 206-8784

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Nashville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm