Serving the Nashville area  ·  (629) 206-8784  ·  Open Mon-Sun 7am-7pm
📞 (629) 206-8784 Free Quote

Metal Roofing in Springfield, TN (37172) · Local Professionals

Nashville Metal Roofing · Fast response in Springfield and the Nashville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+223Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Springfield's downtown square still has that 1900s brick-and-frame look, and a lot of the homes around it are carrying shingle roofs that are older than the people living in them. Drive out toward the farms on the edge of Robertson County and you'll see barns and workshops with corrugated panels that have been baking in the Tennessee sun for decades.

We're Nashville Metal Roofing, and we work Springfield and ZIP 37172 regularly. Whether you're in a Victorian cottage a few blocks off the square or on acreage out near the Highland Rim, we know how these roofs fail and how to fix them right.

Metal Roofing in Springfield (37172)

Springfield sits in the rolling Nashville Basin, and the ground here is limestone bedrock close to the surface in a lot of spots. That matters for drainage. When we're doing a metal roof replacement on an older downtown home, we're often correcting decades of water that ran the wrong way because the original gutters were undersized or the grade settled. The older homes near the square and along the streets off Memorial Boulevard tend to have steep pitches and deep porches, which is actually good for metal. Out in the county, the barns and farm workshops usually have low-slope or exposed-fastener R-panel roofs, and those are the ones we see with pulled screws and rusted washers after a few good hail seasons.

Our team has installed standing seam, corrugated and ribbed panel, metal shingles, and stone-coated steel across Springfield and the surrounding Nashville area. We handle the insured crews, the permits, and the cleanup. You get a roof that sheds our summer thunderstorms and holds up to the freeze-thaw we get in January.

Our services in Springfield

How a Job Works in Springfield

Step 1: You call us at (629) 206-8784 or request a free estimate. We come out to your property in Springfield, walk the roof, check the flashing and fasteners, and look at the attic if you have one. You get a written scope and a real number, not a range that changes later.

Step 2: We pull the roofing permit through the City of Springfield building department and schedule the work. On tighter downtown lots, we stage materials in the driveway or on the street where allowed and keep the crew off your neighbor's property. If you're in a historic district or an HOA, we coordinate the color and panel profile approval before we order anything. Most residential re-roofs take a few days depending on weather and roof complexity.

Step 3: We clean up every nail with a magnet sweep, haul off the old material, and walk the finished roof with you. We don't leave until you've seen the flashing, the ridge, and the gutters and you're satisfied.

Pricing in Springfield depends on the roof, the access, and what we find when we get up there. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts around $7, standing seam starts around $10, and a full metal roof replacement starts around $9. Repairs like a leak fix or flashing repair start around $450, and screw replacement and re-fastening starts around $750. Coating and painting an existing metal roof starts around $2.50 per square foot. The big cost factors are roof size and pitch, how many layers are already on the roof, whether the decking is sound, and how quickly you need it done. Call (629) 206-8784 for a free estimate on your Springfield property.

My barn out past the Springfield square has R-panel with screws backing out. Can you re-fasten it without replacing the whole roof?
Yes. Screw replacement and re-fastening is one of our most common jobs on Springfield area barns and workshops. We pull the old fasteners, check the washers and panel holes, replace them with the correct gasketed screws, and seal any elongated holes. If the panels are still sound, that saves you a full replacement. We'll tell you honestly if the panels are too far gone.
A storm just peeled back panels on my roof in Springfield. How fast can you get out?
We offer free storm and wind damage inspections in Springfield and the surrounding area. Call (629) 206-8784 and we'll schedule an assessment as soon as we can, usually within a day or two depending on how many calls are coming in after the same storm. We tarp and secure what we can to stop the water, then give you a written repair or replacement estimate.
What does a typical metal roof replacement cost for a 1950s brick ranch in Springfield?
Most ranches in Springfield run somewhere in the range of a few hundred to a couple thousand square feet of roof area. At our starting replacement price of around $9 per square foot, you can get a rough idea by measuring your footprint, but pitch, tear-off of old shingles, decking condition, and flashing details all move the number. We give free written estimates so you're not guessing.
Do I need a permit from the City of Springfield to put a metal roof on my house?
In most cases, yes. A full replacement or re-roof typically requires a roofing permit through the City of Springfield building department, and the requirements and inspection schedule can vary. We handle pulling the permit and coordinating inspections as part of the job. If your home is in a historic district, there may be additional design review, so it's worth checking early.
My neighbor's oak tree drops limbs on my roof and my HOA wants a specific metal color. Can you help with approval?
We can. HOA design review and historic district approval are common in Springfield, and we'll provide the panel profile and color samples your board needs. On the property line issue, keep in mind that overhanging limbs from a neighbor's tree are generally a civil matter between property owners, but we can document the damage and recommend trimming. We stay off the neighbor's property unless we have permission.
Are you insured for work on my Springfield property?
Yes. We are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Springfield's climate?
Our hot, humid summers and freeze-thaw winters mean you should check the fasteners and sealant around flashing and penetrations once a year, ideally in the fall before storm season picks up. Keep the gutters clear of acorn and leaf litter, and wash off any algae or moss streaks on shaded slopes. A coating every several years can extend the life of an older panel roof. We offer inspections and coatings if you'd rather have us handle it.
Why choose us?

Trusted professionals in Nashville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Nashville

All your work handled by qualified professionals in Nashville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

223+ Verified Client Reviews in Nashville

⭐⭐⭐⭐⭐ 4.9/5 · 223 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Nashville · Response within 24h · No commitment · ☎ (629) 206-8784

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Nashville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm