Serving the Nashville area  ·  (629) 206-8784  ·  Open Mon-Sun 7am-7pm
📞 (629) 206-8784 Free Quote

Metal Roofing in Mount Juliet, TN (37122) · Local Professionals

Nashville Metal Roofing · Fast response in Mount Juliet and the Nashville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+223Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Mount Juliet grew fast, and a lot of the roofs here grew up right alongside it. The two-story brick and stone homes in subdivisions off Lebanon Road and Mt. Juliet Road mostly went up between the 1990s and today, and many still carry the original builder-grade shingles. Those young roofs are exactly what hail finds first.

We are Nashville Metal Roofing, and we work Mount Juliet (37122) and the surrounding Nashville area every week. Whether you are near Providence Marketplace, out toward the lake, or in one of the older pockets closer to the city, we know how these roofs are built and what fails first. Call (629) 206-8784 and we will come look at yours.

Metal Roofing in Mount Juliet (37122)

Mount Juliet sits in the rolling Nashville Basin, and the ground under these subdivisions is limestone bedrock with clay-heavy soil on top. That matters at the eaves and downspouts, where water needs to move away fast during a summer thunderstorm. The lots are mostly generous by Nashville standards, but the newer sections pack houses close together, so roof access, ladder placement, and where we stage materials all take planning. Many homes here have steep two-story front elevations with complex hips and valleys, which is where wind-driven rain and hail damage concentrate. Add the oaks and tulip poplars that hang over half the driveways in town, and you get gutters full of leaf litter, shaded north slopes that grow moss and algae, and limbs that find shingles every spring.

Our team has worked roofs across Mount Juliet and the Nashville area for years, from simple ranch re-roofs to standing seam on new farmhouse builds out toward the county line. We know which profiles and colors fit the look of these neighborhoods, and we know what the local building department will want to see.

Our services in Mount Juliet

How a Job Works in Mount Juliet

It starts with a call or a text to (629) 206-8784. We schedule a free on-site assessment, walk the roof and the attic if you have one, check the flashing, fasteners, and decking, and take photos so you can see exactly what we see. You get a written estimate with the scope spelled out, not a number shouted from the driveway.

Once you approve, we pull the permit if the job needs one and schedule the work. In Mount Juliet that often means coordinating with an HOA on panel profile and color before we order material, and timing the tear-off around afternoon storms in June and July. On tighter lots we plan where the dumpster goes and how we get panels to the ridge without crossing your neighbor's fence line. Our crews are fully insured, and we keep the site secure each evening.

When the last panel is set, we clean the yard with a magnet sweep for nails, haul off the old material, and walk the finished roof with you. You get a final look at the flashing, the ridge, and the gutters before we call it done.

Pricing in Mount Juliet is straightforward once we see the roof. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Corrugated and ribbed panel runs about $5.50, metal shingle and stone-coated steel around $9, and copper or specialty metal starts near $20. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and flashing or chimney work at $600. The real variables are roof size and pitch, how many layers are already up there, access around the house, and how soon you need it done after a storm. Call (629) 206-8784 for a free estimate on your specific roof.

My subdivision off Mt. Juliet Road has original 1990s shingles. Is a metal roof over them a good idea here?
Often yes, if the decking and flashing are sound and your roof does not already carry too many layers. A retrofit saves tear-off cost and keeps the job fast, which helps on tight lots. We inspect the existing roof first and tell you honestly whether an overlay or a full tear-off makes more sense for your house.
A storm just peeled back panels and we have water coming in. How fast can you get to Mount Juliet?
We prioritize active leaks and storm damage. Call (629) 206-8784, describe what you are seeing, and we will get an inspection scheduled quickly, often same or next day depending on the storm volume. We document the damage with photos, make temporary repairs if needed, and give you a written scope for the permanent fix.
What does a typical metal roof cost for a two-story house in 37122?
Most two-story homes here land somewhere between the low five figures and the mid twenties for installation, depending on square footage, pitch, and the product you choose. Standing seam and copper run higher, corrugated panel lower. Repair calls are far less. We give you a firm number after the free inspection.
Do I need a permit to replace my roof in Mount Juliet?
A full replacement or re-roof usually requires a permit, and the rules and fees are set by the local building department, so we confirm the current requirements before we start. We handle the paperwork and the inspection scheduling as part of the job.
My HOA has design rules. Can you help with approval before we order a metal roof?
Yes. Many Mount Juliet subdivisions have architectural review, and panel profile and color often need sign-off. We provide product specs, color samples, and photos of similar installs to support your application. On property lines, we keep all work and staging on your side and follow local setback rules for any roof changes near a neighbor.
Are you fully insured for work on my Mount Juliet property?
Yes. We carry general liability and workers' compensation coverage, and we are happy to provide proof before work begins. That protects you if anything goes wrong on the job, and it is one reason to ask any contractor for documentation before signing.
What maintenance should I do on a metal roof in Mount Juliet between storms?
Keep the gutters and valleys clear of leaf litter and acorns, especially under the oaks, and rinse shaded north slopes once a year to cut moss and algae. After a hail or wind event, have the fasteners and seams checked. A quick annual inspection catches loose screws and flashing gaps before they become leaks.
Why choose us?

Trusted professionals in Nashville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Nashville

All your work handled by qualified professionals in Nashville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

223+ Verified Client Reviews in Nashville

⭐⭐⭐⭐⭐ 4.9/5 · 223 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Nashville · Response within 24h · No commitment · ☎ (629) 206-8784

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Nashville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm